Welding Wire
Approved to ISO 9002
Registration No.FM 20031
| Dimensions and delivery forms
MIG dia. 0.8; 1.0; 1.2; 1.6; 2.0 and 2.4 mm. Wire basket : OD 300 mm, Id
51 nmm, width 100 mm, weight about 15 kg.
TIG dia. 1.0; 1.2;
1.6; 2.0; 2.4 and 3.2 mm.
Submerged-arc dia. 2.0; 2.4; 3.0; 3.20 and 4.0 mm. Cardboard hub: Id 300 mm, width 70 mm, weight about 30 kg. All welding wire types are avaible
manufactured to the requirements set for the nuclear power industry. ASME
Code Sect. III and KTA 1408
|
| Recommendations | ||
|
|
|
|
|
|
|
|
| Ferritic-austenitic steels | 2205, 2507/P100 | |
| Austenitic steels | 308L/MVR, 308L-Si/MVR-Si | 316L/SKR, 316L-Si/SKR-Si |
| Stabilized austenitic steels | 347/MVNb, 347-Si/MVNb-Si
308L/MVR, 308L-Si/MVR-Si |
318/SKNb, 318Si/SKNb-Si
316L/SKR, 316L-Si/SKR-Si |
| Heat resisting steels | 309L, 253 MA, 353 MA | |
| Welding of unalloyed/low alloy steel to stainless steel and surfacing of unalloyed steel with stainless steel |
309L, 309L-Si, P7 |
P5 |
| Special steels in highly corrosive enviroments | 904L, P12, 2507/P100, 317L/SNR | |
| Welding where low ferrite content is required | SKR-LF | |
| Nickel-based alloys | P10 | P12, P12-0Nb, P16 |